My first attempt, at the beginning of 2008 was a single i-chord on 5 stitches in a combination of dark red wool and gold fingering thread. I made a loop and button fixing and decorated the centre front with a combination of beads and buttons.
I gave it to a freind for her birthday but I did take a few photos first (although the focus was not too good for the detail!).
There were several problems with this first attempt. The buttons etc that were lower than the chord would not lie flat but I wanted to do more than just sew things onto the chord itself. It was another workshop, this time about felting, that gave me an answer. Making felt of different thicknesses and putting together different shapes on top of one another gave me a base that I could make more three dimensional. I also discovered that as I covered it with beads my sewing pulled it into yet another shape.
So for my next attempt I made a two tier felt circle, sewed it together and added beads and a button to it, starting in the middle and working outwards. I also made the i-chord bigger by plaiting together three 3-stitch i-chords. Using bugle beads over two layers of felt added to the height of the finished centrepiece, but the whole necklace was not very large.
My next necklace was more ambitious. 
I started with quite a large felt construction and ended up with a big, bold, very sparkly centrepiece - much more complex and striking than I had expected. It was as if I was expressing a different side to my personality while I worked, adding more and more to the centre without planning the finished result.
I started with quite a large felt construction and ended up with a big, bold, very sparkly centrepiece - much more complex and striking than I had expected. It was as if I was expressing a different side to my personality while I worked, adding more and more to the centre without planning the finished result.
I also changed the construction of the i-chord. I had bought some multi-coloured ribbon/wool on a trip to America and I used this to make three 3-stitch i-chords which I then plaited together. The finished felt and bead centrepiece was sewn onto this plait, quite low down so that it sat properly when worn. [Originally I had sewn it on too high up and this is what this photo shows]
Here are two more photos which show the height of the centrepiece from the side and some of the detail of the beading.
I have really enjoyed making and wearing these necklaces [although the ribbon i-chords do have a tendency to stretch- a fault that I am still working on] and in my next post will show you some more of my creations.
